Termékek hdpe extrúzió (8)

Herkunftsland: Schweiz Körnung: 3 - 5 mm Farbe: schwarz Dichte g/cm3:0.945 - 0.960 Farbe:schwarz Herkunftsland:Schweiz Körnung:3 - 5 mm MFR:0.5 - 1.2 P-Nr.:2000

Extruded sections – plastic profiles, handles, and hoses manufactured by extrusion from various materials (PVC, PE, PP, ABS, and TPE) with different physical characteristics, in different shapes and colours, with different finalization (cutting, coating, printing, embossing, marking).

It is a material with a high resistance to chemicals. Its specific weight is low. It is a slippery material with a low coefficient of friction. The water and moisture absorption property is close to zero. It can be used as cutting plate especially in industrial kitchens and butcher cutting log. It has the ability to be welded. The element that characterizes polyethylene is the molecular weight. Low molecular weight can be grouped into three groups: low molecular weight (PE 300), high molecular weight (PE 500) and ultra high molecular weight (PE 1000).

Ming Xiao Manufacturing Co Ltd ist spezialisiert auf Kunststoffextrusionsprofile, Rohre, Stangen, Schienen, LED-Lampenschirm, Kabelkanäle, Lautsprecherkörper, Arten von Schalen und Objektträgern. Wir können Kunststoffextrudionsprodukte aus Materialien aus PVC, ABS, PP, PE herstellen. PC, PMMA, AS / PE ... Die Kunststoff-Extrusionsprofile werden häufig für Autoteile, Stadtbahnzüge, Lampen und Laternen, die Kühlindustrie, elektrische Haushaltsgeräte, Schreibwaren, Lager und andere Unternehmen verwendet, um qualitativ hochwertige Unterstützungsdienste bereitzustellen. Wenn Sie Kunststoffextrusionsprofile benötigen, senden Sie uns bitte Ihre Zeichnungen und Muster für ein Angebot.

Addix, a French subsidiary of the axon' group, specialising in elastomer components. The company offers extruded profiles for any application. Shapes Standard and special shapes Cords Tubes Cold or hot profile adhesion Compounds Other compounds (see the comparison table) Applications Any market

Syntech HAG Acryl Syntech HAG Acryl is a four-component resin that reacts to form an elastic and durable gel. The properties of Syntech HAG Acryl are: • Good general chemical resistance. • Does not contain acrylamide, methacrylamide, formaldehyde or solvents. • Not inflammable. • Excellent adhesion on mineral building materials such as concrete, cement and bricks. • The reaction speed can be adjusted from a few seconds to several minutes. • When the injected cracks dry out due to temperature or groundwater level fluctuations the gel does not crack easily. • The hardened gel has excellent durability in wet-dry cycles. Syntech HAG Acryl components are supplied ready to use. Create 2 mixes in separate plastic buckets. Prepare only the quantity to be used each time. Solution 1: Syntech HAG Acryl component A (25 kg resin) mixed with Syntech HAG Acryl component B (2.5 kg catalyst). Solution 2: Syntech HAG Acryl component C (2 packs of 0.625 kg) mixed with clean tap water. Attention: The amount of water must be equal in volume to solution 1. When mixing resin, always use a wooden or stainless steel spatula. The reaction time depends on the temperature of the material, the structure of the building and the possible amount of water present. Higher temperature will speed up the reaction time and lower temperature will slow it down. It is advisable to carry out an on-site test, before injection, to observe and define the reaction time. To change the reaction time, only adjust the amount of Syntech HAG Acryl component C. The amount of the other components remains the same. Use a two-component stainless steel pump (manual, electric or pneumatic). Check that the pump and equipment are clean and that there is no residue from previous injection work. The two mixtures are fed into the pump separately, but are mixed homogeneously at a volumetric ratio of 1:1 in the pump's mixing head, before being injected through the pump nozzle. Check the quality of the concrete, as injection involves pressure. Sealing and waterproofing of cracks and cavities in walls, floors, concrete constructions, underground structures, etc. It can be used in constructions that are not permanently in contact with water (fluctuating groundwater level). Injection of very fine cracks. Determine the type and size of packers based on your pump and injection type. If reinforcing steel is present, try to locate it and plan the drilling pattern so that the reinforcement is not drilled. Drill holes at an angle of approximately 45° or less and in the direction of the crack. Make sure the hole goes through the crack. The distance of the drilled holes depends on the width of the crack. Place the packer in the hole. Prepare the pump to start the injection. The injection pressure varies depending on the structure and size of the crack. Start the injection at the lowest point of the crack. Continue injecting until resin flows out of adjacent packer(s). This is necessary to achieve uniform distribution of the material. Stop pumping, unplug and move on to the next packer. Continue the procedure until the crack is completely filled. After the material has cured, the packers can be removed. Holes drilled can be covered with Repar Tix Speedy HP quick-setting mortar. Clean and rinse the pump equipment with water whenever there is a stoppage longer than 15 minutes and, after completing the injection, rinse with a sufficient amount of water. Make sure the pump is clean and stop only when clean water comes out of the pump. The consumption of the product depends on the size of the empty volume to be filled. Can 25 kg [A] - Plastic can 2.5 kg [B] - Canister 0.625 kg [C] - Canister 0.625 kg [D] - Kit: 1 Can 25 kg [A] + 1 Plastic can 2.5 kg [B] + 1 Canister 0.625 kg [C] + 1 Canister 0.625 kg [D]

Fire Resistant Plasterboard Type DF consists of gypsum core reinforced with special additives and clay, enclosed between special paper for enhanced fire resistance. Application: • Ceiling • Wall • Areas with higher requirements for fire protection such as evacuation corridors, stairways, industrial premises, etc. Ideal for indoor use in areas with normal humidity up to 60% Advantages: • High density of gypsum core for better sound insulation and stability Type D • Increased resistance to high temperatures Type F • Easy to cut and mount TECHNICAL INFORMATION: Thickness (mm) Width (mm) Length (mm) Weight (kg/m2) Sheets per pallet 12.5 1200 2000-3000 10.00 60 pcs 15 1200 2000 12.50 50 pcs Thickness (mm):12.5 / 15 Width (mm):1200 Length (mm):2000-3000

Wir fertigen PTFE Presslinge, -Extrudat und -Platten. Ausgangspunkt für die optimale und vor allem vielfältige Halbzeugfertigung in unserem Haus ist die eigene Compoundierung. Ausgangspunkt für die optimale und vor allem vielfältige Halbzeugfertigung in unserem Haus ist die eigene Compoundierung. Diese ermöglicht es uns, ideale Füllstoffkombinationen für spezielle Anforderungen zu generieren. Selbst kleine Mengen für Erprobungen und Musterfertigungen lassen sich problemlos herstellen. Gemeinsam mit unseren Kunden sind bereits eine Vielzahl von PTFE-Spezialcompounds entwickelt und erfolgreich eingesetzt worden. Die eigene Compoundierung in Verbindung mit langjähriger Erfahrung in der Kunststofftechnik bildet somit den Grundstock für die optimale Problemlösung gemeinsam mit dem Kunden. Durchmesser: ab 5 mm Länge: Standard 1000/2000 mm bzw. auf Anfrage